Introduction; Handling And Product Information - Epson SpectroProofer Setup And Maintenance

Introduction

Note:
The ILS30EP-based
SpectroProofer is
backwards compatible with
®
the Epson Stylus Pro
7890, 7900, 9890, and
9900 printers. It is not
supported on the Epson
Stylus Pro 7700 and 9700.
Caution:
Do not touch the
spectrophotometer lens; it
can be easily scratched.
Avoid touching the white
surface of the tile and
backing plates.
®
The Epson SpectroProofer
that can be installed on the Epson SureColor
P9000 printers. When driven by the latest software RIP front-ends, the
SpectroProofer can automate virtually any color management process in
your workflow.
Follow the instructions in this guide to install the SpectroProofer on your
printer. This guide also provides maintenance and troubleshooting
information. Once you've set up the SpectroProofer, follow the instructions
that came with your color measuring software to use the equipment.

Handling and product information

Be careful when handling the spectrophotometer, calibration tile, and
backing plates. If they become scratched or soiled, your color measurements
may be affected.
Spectrophotometer lens
Calibration tile
Note that the spectrophotometer and tile come as a numbered set; they have
been calibrated to work together. If you purchase two or more products, be
sure you use the same numbered pieces together.
Label on
spectrophotometer
®
is an optional in-line color measuring system
Backing plate
3
Introduction
®
P6000, P7000, P8000 and
Label on tile
| 3