Epson SpectroProofer Setup And Maintenance page 18

18 | Maintenance and Problem Solving
Note:
The 24" model has only
one cable. The 44" model
may have a second cable
connected to the port for
the optional take-up reel.
Warning:
The 44" SpectroProofer is
heavy. Two people are
required to lift it.
Caution:
Be careful not to scratch
the spectrophotometer
lens when handling the
unit or setting it down.
3. Open the cover on the right side of the SpectroProofer and disconnect
the cable(s).
4. Slide the SpectroProofer out of the printer.
5. Set the SpectroProofer on a flat surface to avoid damaging the lens.
6. Unplug the cables from the spectrophotometer.
18