Advertisement
Assembly / Operating Instructions
To attach bottom shelf
1. Place bottom shelf in position as shown.
Ensure the cutouts in the shelf align with
the plastic clips on the frame.
2. Fold up sides and attach end flaps around
vertical bars of side panels, using press
studs to secure as shown.
To attach change pad
Place change pad into position, and clip to
1.
one side of top frame.
Lower down and clip other side of change
2.
pad to top frame. Attach drain hose to
outlet on bathtub.
To access bath
To access bath, slide bath outwards. When
finished, slide bath back inwards, ensuring
the bottom of the slide out frame clips into the
plastic clips as shown.
10
How to care for your Change Centre
Cleaning
To ensure the long-lasting use of your change centre, wipe down with a damp
cloth and use a mild soap solution if necessary. Do not use abrasive cleaners.
Always store product in a clean dry place.
Maintenance
Always check parts regularly for tightness of bolts, nuts and other fasteners
- tighten or replace if required. To maintain the safety of your change centre,
seek prompt repairs for bent, torn, worn or broken parts. Use only those parts
and accessories approved by CNP Brands.
If you have any difficulties in assembling the change centre, please contact our
Service Department.
In Australia, contact CNP Brands on 1300 667 137.
In New Zealand, contact Wainhouse Distribution on 0800 567 5000.
11
Advertisement
