Childcare MONTANA DL Change Centre 057626 Assembly Instructions Manual page 4

Assembly Contents
Supplied loose in box (cont)
Plastic assembly tool
Drain tube
Assembly bolt
44mm bolt for front frame bath support
Pre assembled change pad frame
6
Assembly / Operating Instructions
Supplied loose in box (cont)
Bath frame support legs with floor protectors
x1
Support tubes
x1
Attaching pre assembled change pad frame
(PLEASE NOTE: You may need the help of another adult.)
1. Attach all four castors by pushing onto bottom
x12
of end panels.
2. Insert pre assembled bath frame into one side of
an end panel.
x4
3. Insert two assembly bolts and secure using
plastic assembly tool.
x1 Do not tighten completely. Repeat for other end.
x1
x2
7