ELZAB K10 Manual page 36

If the waiting time for completing the archiving process is too long because of the kind of
operating the cash register, you should close the current microSC card and initiate a new
one, thus decreasing the quantity of data on the card. At the moment of initiating, each card
being used in the cash register is marked with a unique label that allows for its identification.
All the cards that have been used for archiving should be kept for the time period provided in
separate regulations concerning copies of printouts from registering cash registers, counting
from the date of the last writing on the given card was done.
A back-up copy can be made by taking the card from the cash register and copying it to
another medium (hard disk, DVD, pendrive) using a microSC card reader connected to a PC,
or without taking it out from the cash register in two ways, using a pendrive and functions
C EJ C as well as via the PC interface using the program SDbackup.exe (available
OPY ARD
on the CD enclosed with the cash register). For archiving with the use of SDbackup.exe it is
necessary to connect the cash register to your PC.
The microSD card is located in the slot under the battery. The card is not subject to the cash
register's sealing and is accessible for the cash register's user. You should not take the
microSD card out of the card interface with the cash register switched on and in particular
while card writing or reading operations are being done. In order to take out the card, e.g. to
make a backup copy, follow the steps below.
1. Make sure the cash
2. Push the battery firmly
36
register is switched off.
until it clicks off.