OLIMAC Drago GT User And Maintenance Manual page 79

Fehler! Verwenden Sie die Registerkarte 'Start', um Titolo 1 dem Text zuzuweisen, der hier
7.5.2 – 20 Hour Adjust/Inspect
Chopping Knives (if equipped)
Every 20 hours of operation inspect the rotating stalk
chopper knives (A).
Inspecting:
Inspect the rotating chopping knives (A) & (B) for
excessive wear or damage. If any damage is observed
replace the blades in pairs only.
Important: Only replace broken or
damaged knives in pairs to maintain proper
balance. Failure to do so can cause damage
to the chopping gearbox.
Important: On
with Twin Chop+ the low speed rotating
knives (B) are painted red and are shorter
than the high speed rotating knives.
angezeigt werden soll.
models equipped
Page | 78