Table of Contents
Advertisement
Fehler! Verwenden Sie die Registerkarte 'Start', um Titolo 1 dem Text zuzuweisen, der hier
Row Unit Gearbox
Prior to seasonal operation inspect the oil level in the
row unit gearbox. Lower the corn head to operating
position and remove the dipstick (A) on each row. The
oil should be between the maximum and minimum
marks on the dipstick (A).
Lubricant Type:
Mobil SHC 634
Capacity:
Non-Chopping: 98 oz (2.9L)
Single Chop:
Twin Chop+:
7.4.2 – Pre-Season Adjust/Inspect
Gathering Chain Tension
Prior to seasonal operation inspect the tension on the
gathering chains (A).
Inspecting:
1) Pull the gathering chain (A) outwards, at the
location of the red arrow, until the tensioning
fork (B) bottoms out.
2) Mark the tensioning fork (B) where it enters
the gathering chain guide (C).
3) Release the gathering chain and measure the
distance between the mark made in Step 2 and
the gathering chain guide (C).
a. Distance between the mark and the
gathering chain guide should be 1/4"
to 5/16" (6mm to 8mm).
Adjusting:
1) Loosen the jamb nut (D).
2) Tighten or loosen the tensioning bolt (E).
a. Tighten = more chain tension
b. Loosen = less chain tension
3) Re-check the gathering chain tension as outlined
above.
4) Once the gathering chain tension is correct
tighten the jamb nut (D).
angezeigt werden soll.
179 oz (5.3L)
193 oz (5.7L)
Page | 75
Advertisement
Table of Contents
