OLIMAC Drago GT User And Maintenance Manual page 63

Fehler! Verwenden Sie die Registerkarte 'Start', um Titolo 1 dem Text zuzuweisen, der hier
Gathering Chain Replacement:
1) Loosen jamb nut (B).
2) Loosen the tensioner bolt (C) until it stops.
Note: The tensioner bolt (C) cannot be removed
from the tensioner tube.
3) Place a clamp (D) on the gathering chain
tensioner (E)
assembly.
4) Remove the four bolts (F) from the gathering
chain guide and loosen the rear poly frame
pivot bolt (G).
5) Remove the gathering chain guide assembly
(H) from the row unit.
6) Replace the gathering chain (I).
7) Ensure the new gathering chain is timed
correctly to the corresponding chain. See
Section 6.7.3.
8) Reinstall the gathering chain guide assembly
(H). The gathering chain guide should be
installed in the outermost position of the slots.
See Section 6.7.4.
9) Tension the gathering chain. See Section
6.7.1.
angezeigt werden soll.
to compress the tensioner
Page | 62