OLIMAC Drago GT User And Maintenance Manual page 78

Corn head
Table of Contents

Advertisement

Fehler! Verwenden Sie die Registerkarte 'Start', um Titolo 1 dem Text zuzuweisen, der hier
7.5 – Every 20 Hours of Operation
Danger: Before lubricating or performing maintenance on any part of the corn head, engage the
feeder house lift cylinder safety stops, set the parking brake, turn off the combine engine and
remove the key and hang a warning sign on the operator's platform. Failure to do so could
result in serious injury or death.
7.5.1 – 20 Hour Grease/Lubricate
Stalk Rollers
Every 20 hours of operation lubricate the stalk roller
lower bearings (A). It is recommended to grease the
corn head at the end of the day when the stalk rollers
are warm. Fill until clean grease is seen pushing out of
the stalk roller.
Lubricant Type:
Mobilux EP 0 Grease
Folding Tow Shaft Coupler (folding heads only)
Every 20 hours of operation lubricate the folding tow
shaft coupler (A).
Lubricant Type:
Mobilux EP 0 Grease
Important: Pump the grease into the zerks
until it is seen leaking out. This coupler holds
a significant amount of grease.
angezeigt werden soll.
Page | 77

Advertisement

Table of Contents
loading

Table of Contents