Adjusting The Hydraulic Brakes - neomouv NOVA S User Manual

 T
HE SEAT TUBE SHOULD NOT COME OUT BEYOND THE ETCHED SAFETY MARK
Security mark
The minimum height between the high point of the saddle and the ground is 85 cm.
2.2

Adjusting the hydraulic brakes :


Allen key 5 mm

Screwdriver
Your EBike can be equipped with front and rear hydraulic disc brakes. The maintenance of this system is the
responsibility of a specialist. However here are some recommendations for use :
- Periodically check the state of the pads. Avoid changing pads at the last moment. When the lining is
worn, the disc rubs against pads and damage to the disk can occur.
Here are two ways to check for wear:
•
When the sound appears metallic during braking, the surface of the pad is worn.
• Visually, you can check to see the thickness of the pad surface by standing in front of the stirrup.
- Periodically check the cleanliness and disc wear. To clean discs use water or alcohol.
- Absolutely avoid contact with an oil on the disk or pads. If contact occurs, it is essential to change the
pads. (They are porous and will therefore absorb oils).

In general, WHEN HANDLING THE HYDRAULIC DISC BRAKE SYSTEM, DO NOT IMPROVISE.
We recommend you seek expert help when in doubt.
Manuel NOVA S –MOUNTAIN S – ENARA S
5
( ).
VERTICAL BARS
Pads
Disc