Maintenance; Securite - Recommandations - neomouv NOVA S User Manual

6.3

Maintenance :

Like any mechanical component, a bicycle is subject to high stress and wear. Different materials
and components may react differently to wear or fatigue.
If the service life of a component has been exceeded, it may break off in a single blow, possibly causing injury
to the cyclist. Cracks, scratches and discoloration in high stress areas indicate that the component has
exceeded its life and must be replaced.
 DO NOT USE ANY LUBRICANT ON THE SURFACE OF THE RIMS OR TYRES.
 Check the condition and correct operation of the signalling devices (e.g. bulbs etc.) and clean
them if necessary, with a dry cloth.
Regularly check the following points:
• Wheel tightening (25 Nm for the front, 25 Nm for the rear)
• Wear level of tyres (replace the tyre as soon as the wear indicator is reached) and adjust the tyre
pressure to 60 to 65 Psi-/ 2.8 to 4.5 bar. The tyres of your bicycle are compatible with the rim tape, no
modifications should be made to them, only suitable spare parts (tyres, inner tubes, brake friction
elements etc.) should be considered. Contact your dealer for more information.
•
Check that the steering (6 Nm), pedals (20 Nm) and saddle (6 Nm) are tight.
Because of its weight and the inertia due to the motor, you should allow for longer braking distances when
riding your electric bike, especially in rainy weather.
Your electric bike is suitable for use in the city and for road trips.
On public roads, everybody who rides a bike must respect and apply the provisions of the highway code of the
country they are in as well as the legal requirements for this type of transport. (e.g. lighting, signalling,
wearing a helmet (recommended) reflective device etc.).
For the safe use of your bike, we recommend periodically checking and inspecting: the brakes (wear of the
pads), the condition of the wheel rims and spokes (wear of the wheel rims and spokes), the condition of the
tyres, the steering (fastenings, tightness of the wheel nuts) and all other parts specific to your vehicle. The
wheel rims must be smooth, without any cracks, breakage, or deformities. If you notice any anomaly with the
wheel rims, please get them checked immediately.
WARNING! Like any mechanical component, a bicycle is also subject to high levels of stress and wear.
Different materials and components may react differently to wear or erosion. If the predicted lifespan of a
component has been exceeded, it may break suddenly, potentially causing injury to the rider. Cracks,
scratches, and discolouration in areas that are subjected to high stress indicate that the component has
exceeded its lifespan and should be replaced.
For your safety, it is equally important to replace any critical components that are showing signs of wear or
any other problem (e.g., tyres, wheel rims, etc.) with original parts. Contact your dealer.
7 - SECURITE – RECOMMANDATIONS :
Manuel NOVA S –MOUNTAIN S – ENARA S
16