GE DigitalFlow DF868 Startup Manual page 79

GE
Sensing
We,
declare under our sole responsibility that the
DigitalFlow™ GM868 General-Purpose Gas Ultrasonic Flowmeter
to which this declaration relates, are in conformity with the following standards:
• EN 60079-0: 2009
• EN 60079-1: 2007
• EN60529: 1991 + A1: 2000
• II 2 G Ex d IIB+H2 T6 Gb Ta = 20°C to 60°C; IP66; FM12ATEX0040X
(FM Approvals Ltd, Windsor, Berkshire, UK - NoBo 1725)
• EN 61326-1: 2006, Class A, Table 2, Industrial Locations
• EN 61326-2-3: 2006
• EN 61010-1: 2012, Overvoltage Category II
following the provisions of the 2004/108/EC EMC, 2006/95/EC Low Voltage and 94/9/EC ATEX Directives.
The unit listed above and any ancillary equipment supplied with it do not bear CE marking for the Pressure
Equipment Directive, as they are supplied in accordance with Article 3, Section 3 (sound engineering practices and
codes of good workmanship) of the Pressure Equipment Directive 97/23/EC for DN<25.
Billerica - February 12, 2015
Issued
1100 Technology Park Drive
Billerica, MA 01821
DigitalFlow™ DF8688 Liquid Ultrasonic Flowmeter
DigitalFlow™ GC868 Clamp-On Gas Ultrasonic Flowmeter
DigitalFlow™ GF868 Flare Gas Mass Ultrasonic Flowmeter
DigitalFlow™ GS868 Steam Mass Ultrasonic Flowmeter
GE Sensing
USA
Certification & Standards, Lead Engineer
EC DECLARATION
OF
CONFORMITY
DOC-0013, Rev. C
Mr. Gary Kozinski