GE DigitalFlow DF868 Startup Manual page 32

Chapter 2. Initial Setup
2.5.3 1- and 2-Channel Meters (cont.)
[F1]-[F4]
4. Press to select the Total Decimal Digits (the digits to the right of the decimal point) in the totalized flow
display.
2.5.3a Mass Flow
Mass Flow
If the prompt in the
programming sequence appears if
[F1]-[F4]
1. Use the keys to select the desired Mass Flow units, listed in Table 5.
[F1]-[F4]
2. Use the keys to select the desired Mass Flow Time units.
[F1]-[F4]
3. Use the keys to select the MDOT Decimal Digits (the digits to the right of the decimal point) for displaying
mass flow.
[F1]-[F4]
4. Use the keys to select the Mass (Totalizer) units, listed in Table 5.
[F1]-[F4]
5. Use the keys to select the Mass Decimal Digits (the digits to the right of the decimal point) for displaying
totalized mass flow.
22
Table 4: Totalizer Unit Options
English Totalizer Units
Gal - U.S. Gallons
MGAL - Mega U.S. gallons
3
ft - Cubic Feet
3
Mft - Mega Cubic Feet
BBL - Barrels
MBBL - Megabarrels
Acre-inches
Acre-feet
SETUP
submenu is not enabled, skip this sub-section. However, the following
Mass Flow
is enabled.
Table 5: Available Mass Flow Units
English
LB = Pounds
KLB = Thousands of LB
MMLB = Millions of LB
TONS = Tons (2000 LB)
DigitalFlow™ Multipurpose Ultrasonic Liquid Flowmeter Startup Guide (1- and 2-Channel)
Metric Totalizer Units
L - Liters
ML - Megaliters
3
m - Cubic Meters
3
Mm - Mega Cubic Meters
BBL - Barrels
MBBL - Megabarrels
Metric
KG = Kilograms
TONNE = Metric Tons (1000 KG)