Connecting With Rs232 Serial Port 通过 Rs232 串口连接 - Honeywell HF680 User Manual

Connecting with RS232 Serial Port
1. Turn off power to the terminal/computer.
2. Connect the appropriate interface cable to the device.
1. 关闭终端/计算机电源。
2. 使用合适的连接线，连接到设备上。
Note: For the scanner to work properly, you must have the correct cable for your type of terminal/computer.
备注：必须使用与终端/计算机配套的连接线，才能确保读码器正常工作。
HF680
RS232 Serial Port Connection:
HF680
RS232 串口连接：
Note: The power supply must be ordered separately, if needed.
备注：如需电源，须单独购买。
3. Plug the serial connector into the serial port on your computer. Tighten the two screws to secure the connector to the port.
通过 RS232 串口连接
Power Adapter (if included)
电源适配器（附带时）
1 – 5