Inter-Character Data Transmission Delays 字符间数据传输延时 - Honeywell HF680 User Manual

Inter-Character Data Transmission Delays
数据传输延时
Use these codes to select the amount of delay between sending data characters and "Bar Code" records from the scanner
to the host. This helps prevent the scanner from overflowing host input buffers.
使用以下条码可以设置从读码器向主机发送数据字符和"条形码"记录时的延时长短。这样有助于避免读码器造成
主机输入缓冲区溢出。
*1 msec Inter-Character Delay
* 1 毫秒字符间延时
25 msec Inter-Character Delay
25 毫秒字符间延时
Note: This feature only applies for RS232 Interface.
备注：该功能仅适用于 RS232 接口。
10 msec Inter-Character Delay
10 毫秒字符间延时
~ Variable msec
Inter-Character Delay
~可变字符间延时（单位为毫秒）
Scan this barcode and sequence of code bytes in
Section "Code Byte Usage" to set the delay. Delay
range can be set from 1 to 255 msecs.
Refer to the Multi-Code Configuration Method.
扫描该条码以及"条码字节用法"一节的相应条码字节
序列。延时范围为 1 到 255 毫秒。
可参考多条码配置方法。
字符间
3 – 4