B) Air Blower Unit - JBI Alpha-Doc MKIII Instruction Manual

b) Air blower unit

You must connect it on the PVC black tube, located inside the base on the left (operator side)
Adjusting of the blower level :
Open the door of the confetti tray
Turn the regulator (clockwise) to increase the pressure (from 0 to 1 bar).
Turn
clockwise = +
The filter located under the manometer has to be always clean, without water nor
oil. Check the filter before using and clean it if necessary.
This system makes easier the separation of sheets
OPEN
NOTICE
Pressure regulator
(inside on the left)
19/24