Operation; Ion Technology - Fagor SP-1815 Instructions For Use Manual

•
Do not use spray products whilst the
appliance is operating.
• Do not use the appliance for anything
other than drying and modelling human
hair.
•
Do not cover the air inlet or outlet when
the appliance is operating.
• In the event of a fault and/or a
malfunction of the appliance, switch
it off and do not try to repair it. If the
appliance needs repairing, only contact
a Technical Support Service authorised
by the manufacturer.
• In order to prevent damage to hair, do
not bring the hair dryer too close to
your hair.
• Switch off the appliance when you are
not using it, even if only for a moment.
• When unplugging, do not pull on the
cable.
• Supervise children to make sure that
they are not playing with it. They should
not use the dryer if there is no adult
present.
• For greater protection it is
recommended to install a residual
current device (RCD) with a residual
operating current which does not
exceed 30mA. Ask your installer for
advice.
• This appliance is not designed for
use by people (including children)
with reduced physical, sensory or
mental abilities, or those with lack
of experience or knowledge; unless
they are supervised or instructed on
the use of the appliance by a person
responsible for their safety.
• After using the appliance, leave it to
cool down before putting it away.
• Unplug the appliance when you are not
using it.

4. OPERATION

• After washing your hair, dry it with a
towel.
• Do not use spray products or
inflammable chemical haircare products.
• The hair dryer includes an accessory:
the nozzle to aim the air flow or dry a
specific point. This accessory fit on to
the front part to the hair dryer easily.
• Make sure that your hands are
completely dry before plugging in the
dryer.
• Plug the appliance in and select
the switch position with the chosen
temperature and air flow.
I/O switch and air flow selector: With this
control, you can switch the appliance on
and off and also select the air flow which
suits you best.
0 = off
I = gentle air flow
I = strong air flow
Temperature selector: With the
temperature selector you can select the
working temperature.
I = low temperature
II = mid temperature
III = high temperature
Cold air button: The hair dryer is fitted
with a cold air button (2) which cools the
air quickly when pressed, regardless of the
temperature selector position.
• Once you have dried your hair, unplug
the appliance.

ION TECHNOLOGY

The SP-2005I emits negative ions whenever
it is in use. It is not therefore necessary to
activate this function.
The negative ions neutralise the static
electricity in your hair. They make it smooth,
shiny and manageable and prevent it from
drying out. They also turn the drops of
water into micromolecules. This enables
your hair to absorb humidity easily, leaving
it smooth and shiny.
(The SP-1815 dryer does not have this
function).
8