Husqvarna 455 Rancher II Workshop Manual page 38

Repair Instructions
5
Undo screws E. Unhook the rubber mountings D
on both sides. See Figure 36b.
6
Remove the air filter holder.
7
Note! The lug on the carburetor must be detached
from the partition wall before the carburetor can be
removed. See figure 37a.
NOTE!
The lug on the carburetor is securely
attached to the partition wall.
8
Use a small flat screwdriver to snap open the con-
nector from the black attachment. Separate the
connector by pressing down the catch with a flat
screwdriver and then pulling the unit apart. See
figure 37b.
38 –
English
D
E
Fig 36b
Fig 37a
Fig 37b
D
D
E