Husqvarna 455 Rancher II Workshop Manual page 37

Dismantling the carburetor
1
Dismantle the cylinder cover and the air filter.
2
Loosen the suction hose A, the return hose B and
the fuel hose C. See figure 34.
3
Detach the earth cable from the carburetor by
undoing the screw as outlined in figure 35.
4
Press down the throttle valve shaft (1) and remove
the throttle pressure rod (2) out of its fastening as
outlined in figure 36a.
Fig 34
Fig 35
Fig 36a
Repair Instructions
A
B
C
1
2
37
English –