Table of Contents
Advertisement
1. Wash All Components Before Assembly
2. Install the Motor Bracket
Attach the stainless steel Motor Bracket to the left side of
the Cooking Box, using the 1/4 x 20 x 5/8" fasteners and
the 1/4-20 Keps nuts.
3. Attach the Motor
Slide the Motor onto the stainless steel Motor Bracket.
4. Attach Rotisserie Shaft to the Rottisserie
Basket
Screw Handle Shaft and Handle together.
Screw Rotisserie Shaft to Rotisserie Basket and tighten
shaft with adjustable wrench. Screw Handle
Shaft/Handle to Rotisserie Basket. NOTE: All threads
are counter-clockwise, or tighten to the left.
Tighten
Shaft
Here
Rotisserie
Shaft
Rotisserie
Basket
Handle Shaft
Assembly Instructions
Handle
5. Assembly of Meat Clamp
Insert both Thumb Screws into the holes on the Lock
Arm. NOTE: Do not tighten Thumb Screws fully.
Lock
Arm
Insert middle Meat Clamp Arm into top into top of the
Lock Arm as shown. Tighten top Thumb Screw to lock
Meat Clamp into shaft.
Repeat all of step 4 for second Meat Clamp.
6. Attach Meat Clamps to Rotisserie Basket
Face prongs of Meat Clamp toward the inside of the
Rotisserie Basket. Slide bottom of Lock Arm onto
tapered portion of the rail of Rotisserie Basket. Slide
Lock Arm along rail to desired position. Tighten Thumb
Screw at bottom of Lock Arm to fix its position on
Rotisserie Basket.
Bottom of
Lock Arm
Screw
Holes
Thumb
Screw
Middle
Meat
Clamp
Arm
Top of
Lock Arm
Tapered
Rail
Advertisement
Table of Contents
