VDO M5 Short Instruction Manual page 51

Resetting trip data to zero
SET
TPC BIKE
Starting/stopping a trip section
SET
TPC BIKE
ATTENTION:
If the speed is zero, the trip section counter automatically
stops. If you set off again, the trip section counter automatically continues.
– Press and hold the BIKE button
The text Tour Data RESET appears on
the display.
– Continue to hold down the BIKE
button
Note: the distance, ride time and calories
(if the heart rate function is activated) are
added to the totals.
– START: Simultaneously press
the BIKE + SET buttons
– STOP: Simultaneously press
the BIKE + SET buttons
– RE-START: Simultaneously
press the BIKE + SET buttons
again
– RESET: Press and hold the
BIKE button
51