QuickStrut
Recommendations
At times it may be necessary to create holes to keep the QuickStrut from slipping.
Continuosly check the system to assure it has not slipped or lost it's tension.
Keep the tension strap away from hot surfaces. If this is unavoidable try to shield the strap.
It is also important to use cribbing when needed.
Vetter GmbH
A Unit Of IDEX Corporation
Blatzheimer Str. 10-12
D-53909 Zülpich
Fon
+49 (0) 2252 / 30 08-50
Fax
+49 (0) 2252 / 30 08-70
Fon Exp. +49 (0) 2252 / 30 08-60
Fax Exp. +49 (0) 2252 / 30 08-71
www.vetter.de
vetter.info@idexcorp.com
Page:
14