General Maintenance - Idex Vetter QuickStrut Operating Instructions Manual

QuickStrut Page: 10

GENERAL MAINTENANCE

• After each use, wipe all components down to remove and dirt and debris.
• During the wipe down, check for wear and damage on all parts.
• Check all fasteners and confirm they are tight and secure.
• Spray mechanical components (springs and hinges) with a lubricant to keep
them moving freely. On the adjustment shaft a petroleum type jelly should be used.
QuickStrut-Stabilization Kit
The QuickStrut is primarily intended for stabilizing vehicles in any position
(on it's side or roof) caused by accidents. It is also suited for temporarily
supporting other objects (walls, beams, etc.) that may need to be stabilized.
The QuickStrut can be set-up and disassembled very quickly by a single person.
CAR ON IT'S SIDE CAR ON IT'S ROOF
CAR ON ANOTHER CAR