Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
NOTE:
If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place before
replacing the speakers.
1
Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest assembly.
2
Route the speaker cable through the routing guides on the palm-rest assembly.
3
Connect the speaker cable to the system board.
GUID-40DC76F7-B3EC-450A-848E-632D68C352E2
Released
computer. After working inside your computer, follow the instructions in
GUID-2EDC3537-91DB-471B-88C1-E340F1F4169E
Released
Replacing the speakers
www.dell.com/
17
After working inside
Replacing the speakers
45