Disabling Intel Optane Memory; Wifi Power Cycle; Flea Power Release - Dell G5 5590 Service Manual

NOTE: Applications may take up to three subsequent launches after enablement to see the full performance benefits.
Identifier
Status

Disabling Intel Optane memory

CAUTION: After disabling Intel Optane memory, do not uninstall the driver for Intel Rapid Storage Technology as it will result in a
blue screen error. The Intel Rapid Storage Technology user interface can be removed without uninstalling the driver.
NOTE: Disabling Intel Optane memory is required before removing the SATA storage device accelerated by the Intel Optane
memory module from the computer.
1 On the taskbar, click the search box, and then type Intel Rapid Storage Technology.
2 Click Intel Rapid Storage Technology.
The Intel Rapid Storage Technology window is displayed.
3 On the Intel Optane memory tab, click Disable to disable the Intel Optane memory.
NOTE: For computers in which Intel Optane memory acts as a primary storage, do not disable the Intel Optane memory.
The Disable option will be grayed out.
4 Click Yes if you accept the warning.
The disabling progress is displayed.
5 Click Reboot to complete disabling your Intel Optane memory and restart your computer.
Identifier
Status

WiFi power cycle

If your computer is unable to access the internet due to WiFi connectivity issues a WiFi power cycle procedure may be performed. The
following procedure provides the instructions on how to conduct a WiFi power cycle:
NOTE: Some ISPs (Internet Service Providers) provide a modem/router combo device.
1 Turn off your computer.
2 Turn off the modem.
3 Turn off the wireless router.
4 Wait for 30 seconds.
5 Turn on the wireless router.
6 Turn on the modem.
7 Turn on your computer.
Identifier
Status

Flea power release

Flea power is the residual static electricity that remains on the computer even after it has been powered off and the battery has been
removed. The following procedure provides the instructions on how to conduct flea power release:
1 Turn off your computer.
2 Disconnect the power adapter from your computer.
3 Press and hold the power button for 15 seconds to drain the flea power.
GUID-CD2E8B90-160E-43C9-BA9D-F0F6C6BAA458
Released
GUID-B4DD52FB-C0FE-4818-9D7C-A0D2BF4491D7
Released
GUID-8CEF1F7A-1327-43EB-9E2E-8EC169AEFE4A
Released
Troubleshooting 123