Advertisement
3
| XPRESSFILL Systems LLC
lower
are contacted by the liquid simultaneously.
9. Place your cans, two at a time, on the shelf, centered under the right two or left two spouts. For
spouts 1 and 2, turn on the Fill Switch located on the left side of the machine about 3" from the top
(about 3 seconds, which can be adjusted) and then the fill with your carbonated product. For Spouts 2 and 4,
fill cycle will end independently per spout when the liquid reaches the sensor. Turn off the Fill Switch per side.
10. When the cans are full, check the level and make any adjustments as needed (raise/lower shelf or
raise/lower surgical tubing). If the level is satisfactory, remove the cans to your seamer.
Advertisement
