Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for XpressFill XF4400
Summary of Contents for XpressFill XF4400
- Page 1 XpressFill XF4400/XF2200...
- Page 3 All repairs must be performed by a qualified Service Technician or with the approval from an XpressFill Technician. Only original factory replacement parts should be used. Electrical shock or fire could result if the electrical supply for the can filler covered in this manual is not correctly installed or if the can filler has been improperly grounded.
-
Page 4: Safety Warnings
Safety Warnings... - Page 5 XPRESSFILL Systems LLC | Table of Contents t n I d o r t c u n o i Set Up Your Filler o r T l b u h s e t o o g n i a e l...
- Page 6 The guarantee does not apply to damage resulting from normal wear and tear, accident, abuse, negligence or shipping. The guarantee may be rendered invalid if the customer has made repairs or alterations to the machine without first consulting XpressFill Systems LLC.
- Page 7 XPRESSFILL Systems LLC | XPRESSFILL Systems LLC | Set Up Your Filler 1. Unpack the filler from the box. Place it on a flat surface where you plan to fill your cans. TIP: To get familiar with your filler, you may want to initially test it with water.
- Page 8 (this will allow the weight of the partially filled can to hold the can in place). If you have a XF4400, repeat with the second pair of cans.
-
Page 9: Troubleshooting
| XPRESSFILL Systems LLC Troubleshooting If at any time you have issues with the setup or adjustment of your XF2200/XF4400 can filling machine, or any questions about filling your product, please contact XpressFill at the number listed on the front of this manual. We are always happy to assist you. -
Page 10: Cleaning And Sanitizing
See Label for more precautionary information. Before storing your XpressFill, flush your filler with 2 gallons of warm water. Be sure to get all the water out of the flow path by running air or CO2 through the liquid and CO2 inlet ports. - Page 11 XPRESSFILL Systems LLC | Cleaning & Sanitizing (cont) Attach the cleaning hoses as pictured. Tubing and connectors are supplied in the accessory packet. Connect the cleaning assembly to your cleaning / sanitizing solution in a pressurized container. Place a can on the shelf under a spout and activate the switch on the shelf to start the cleaning process.
- Page 12 | XPRESSFILL Systems LLC Additional Information Our fillers use “Push-To-Connect” type connectors which are standard in the beverage industry. 1. Installation simply requires pushing a tube into the fitting and pulling lightly to check that the connection is secure. 2. Removal requires using the included tool to firmly push the collet and remove the tube.
- Page 13 (where the power cord plugs in). Unplug the machine and set a screwdriver on the notch (do not remove screws) and pop the spare fuse holder toward you, then replace the fuse. XpressFill Part No. 20002 - Bussmann Series by Eaton, Model BK/GDB-2A, 5mm x 20mm...
Need help?
Do you have a question about the XF4400 and is the answer not in the manual?
Questions and answers