Elitegroup Computer Systems 748-A Manual page 39

Resume On RTC Alarm / Date / Hour / Minute / Second
The system can be turned off with a software command. If you enable this
item, the system can automatically resume at a fixed time based on the sys-
tem's RTC (realtime clock). Use the items below this one to set the date and
time of the wake-up alarm. You must use an ATX power supply in order to use
this feature.
Resume on PME (Enabled)
This option allows you to enable or disable the Resume on PME function.
Resume on MAC PME (Enabled)
This option allows you to enable or disable the Resume on MAC PME function.
Wake on Ring/LAN (Disabled)
The system can be turned off with a software command. If you enable this
item, the system can automatically resume if there is an incoming call on the
Modem. You must use an ATX power supply in order to use this feature.
Restore on AC/Power Loss (Power Off)
This sets the power state after a shutdown due to an unexpected interrupt of
AC power.
35