Installing A Hard Disk Drive/Cd-Rom - Elitegroup Computer Systems 748-A Manual

6. Install any remaining DIMM modules.
DDR SDRAM memory module table:
DDR 266 3 DIMMs
DDR 333 3 DIMMs
DDR 400 2 DIMMs
Note: We do not guarantee that all DDR 400 memory modules will work prop-
erly with your mainboard.

Installing a Hard Disk Drive/CD-ROM

This section describes how to install IDE devices such as a hard disk drive
and a CD-ROM drive.
Your mainboard has a primary and secondary IDE channel interface (IDE1 and
IDE2). An IDE ribbon cable supporting two IDE devices is bundled with the main-
board.
If you want to install more than two IDE devices, get a second IDE cable and
you can add two more devices to the secondary IDE channel.
IDE1: Primary IDE Connector
The first hard drive should always be connected to IDE1.
17