Intended Use; Before First Use; Using As Blow Gun - Westfalia 25 77 82 Instruction Manual

Intended Use

The air tool is intended for vacuuming of loose, dry dirt such as dust, lint,
crumbs on floor coverings and upholstery in the home and car. It is not
suitable for vacuuming of hazardous dust and liquids.
The air tool can also be used for blow-drying, cleaning and blowing out
material from objects and difficult to access places.
The intended use also includes an operation following the operating
instructions.
Any use beyond these parameters (different media, applying force) or any
changes (reconstruction, no original accessory) can lead to serious risks and
is regarded as use that is contrary to the intended purpose.

Before first Use

Unpack the air tool and the accessory and check all parts for any damage in
transit. Dispose of packaging materials or store them out of reach of children.
Plastic bags etc. may become a deadly toy for children.

Using as Blow Gun

1. Insert the injector nozzle (1), as shown in figure A, into the rear opening of the
device. Pay attention to the direction of the injector nozzle and make sure to
add the two sealing rings at both ends of the connecting piece.
2. Screw the dust bag connector (2) on the rear opening of the device.
3. If necessary, install the flexible hose (13) at the suction/blow opening (3) of the
device. Secure the hose with a hose clamp (8).
4. The device is equipped with an air quick coupling adaptor (6). Use the quick
coupling adaptor to connect the air tool with the compressed air supply.
5. Power up the compressed air generator.
6. Press the trigger (4) to start the delivery of air. The farther the trigger is
pressed, the stronger the air jet will be.
7. Release the trigger to stop the delivery of air.
8. After work disconnect the tool from the compressed air generator.
Using
9