Related Manuals for elektraLite LXE 700 Spot
Summary of Contents for elektraLite LXE 700 Spot
- Page 1 LXE 700 Spot USER MANUAL (V1.26) Elektralite (a division of Group One), 70, Sea Lane, Farmingdale, NY11735, U.S.A. T. +1 (516)-249-3662. F. +1 (516)-249-8870 WWW.MYELEKTRALITE.COM...
- Page 2 Thank you for choosing LXE 700 Spot. When you unpack LXE 700 Spot, there should be in the box the fixture, a DMX 5 pin XLR cable, and a safety cable. Please check carefully that there is no damage caused in shipping. If you notice any damage then immediately let your shipper know and the dealer from whom you purchased LXE 700 Spot.
-
Page 3: Safety Instructions
Always disconnect LXE 700 Spot from the power source, when the device is not in use or before cleaning it. Only unplug LXE 700 Spot from the power cord. Never pull out the plug out by pulling on the power cord. -
Page 4: Installation Instructions
Mounting LXE 700 Spot The installation of LXE 700 Spot has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any deformation. - Page 5 Do not clamp the cable to the U bracket or clamp. That is not a secondary safety point. A secondary safety point is any point that will adequately hold LXE 700 Spot if the U brackets, clamps or the fixtures base breaks or fails.
- Page 6 Locks for Pan and Tilt. The LXE 700 Spot has two levers for locking the pan and the tilt function. These locks are engaged for shipping. The locks must be disengaged before turning on the fixture. The Pan lock is located in the middle of the yoke at the base.
-
Page 7: Dmx-512 Control Connection
The other end should be connected to the male 5-pin XLR input of LXE 700 Spot. Then daisy-chain out of the first LXE 700 Spot and into the next LXE 700 Spot or other dmx device. Never “Y” split the DMX connection. - Page 8 Note: After switching on, LXE 700 spot will automatically detect whether DMX 512 data is received or not. If the data is received, the display will show "A.001" or whatever the address is set to, like “A.025” If there is no data received at the DMX-input, the display flashes "A001" with the actually set address.
-
Page 9: The Display Panel
The Display Panel: Default settings shaded. VALU A001~AXXX (AXXX) DMX address setting SLAV SLA1/ SLA2/ SLA3 Slave setting ADDR Change address EBOC ON/OFF external controller ALON (AU-A) Automatic Run in Stand Alone AUTO MAST (AU-M) Automatic Run as Master Sound-controlled Run in Stand MODE ALON (SO-A) - Page 10 - ９ - LXE700 SPOT...
- Page 11 - １０ - LXE700 SPOT...
-
Page 12: Channel Functions
Channel Functions: CHANNEL 1 : color wheel 8 colors plus white, color cycle or rainbow effect CHANNEL 2 : cyan color mixing CHANNEL 3 : magenta color mixing CHANNEL 4 : yellow color mixing CHANNEL 5 : pan movement (max. 630°) CHANNEL 6 : tilt movement (max. - Page 13 DMX Channel Function & Values: Channel 1 - Color Wheel : 0-13 Open / white 14-27 Color 1 28-41 Color 2 42-55 Color 3 56-69 Color 4 70-83 Color 5 84-97 Color 6 98-111 Color 7 112-127 Color 8 128-189 Forwards rainbow effect fast to slow 190-193 No rotation...
- Page 14 Channel 8 - Gobo Wheel 1 Select Open 10-19 Rot. gobo 1 20-29 Rot. gobo 2 30-39 Rot. gobo 3 40-49 Rot. gobo 4 50-59 Rot. gobo 5 60-69 Rot. gobo 6 70-89 Gobo 1 shake slow to fast 90-109 Gobo 2 shake slow to fast 110-129 Gobo 3 shake slow to fast...
- Page 15 Channel 12 - Gobo wheel 2 Rotation Gobo indexing(see Ch 13) 4-127 Forwards gobo rotation fast to slow 128-131 No rotation 132-255 Backwards gobo rotation slow to fast Channel 13 - Gobo wheel 2 index 0-255 Gobo indexing Channel 14- 3 facet rotating prism open 4-63 Forwards rotation from fast to slow...
- Page 16 Channel 17 - Shutter, strobe: 0-31 Shutter closed 32-63 No function (shutter open) 64-95 Strobe effect slow to fast 96-127 No function (shutter open) 128-159 Pulse-effect in sequences 160-191 No function (shutter open) 192-223 Random strobe effect slow to fast 224-255 No function (shutter open) Channel 18- Dimmer (intensity):...
- Page 17 128-135 Macro16 136-143 Macro 17 144-151 Macro 18 152-159 Macro19 160-167 Macro20 168-175 Macro21 176-183 Macro22 184-191 Macro23 192-199 Macro24 200-207 Macro25 208-215 Macro26 216-223 Macro27 224-231 Macro28 232-239 Macro29 240-247 Macro30 248-255 Random CMY Channel 22– Lamp on/off, reset, Int. Prog. 0-19 color &...
-
Page 18: Error Message
The following points have to be considered during the inspection: 1) All screws, clamps etc. used to install LXE 700 Spot have to be tight and must not be corroded. Check them regularly because, remember, LXE 700 Spot moves and so it will have an effect on whatever you are using to hang the fixture. -
Page 19: Technical Specifications
Packing dimensions :30” x 22” x 18” (76.5mm x 55.5mm x 46.5mm) Net weight : 75 pounds (34Kgs) Please note, Elektralite is constantly improving their product range and we reserve the right to make changes without prior notice. Other Elektralite Products include : [Also check out our website at www.myelektralite.com]... - Page 20 Turbohazer Haze Machine. - １９ - LXE700 SPOT...
Need help?
Do you have a question about the LXE 700 Spot and is the answer not in the manual?
Questions and answers