Subscribe to Our Youtube Channel
Related Manuals for elektraLite Cool White Dazer
Summary of Contents for elektraLite Cool White Dazer
- Page 1 Elektralite LED Cool White Dazer USER MANUAL Elektralite (a division of Group One), 70, Sea Lane, Farmingdale, NY11735, U.S.A. T. +1 (631)-396-0184. F. +1 (631)-396-0190 WWW.MYELEKTRALITE.COM...
-
Page 2: Safety Instructions
Always disconnect the Elektralite CW Dazer from the power source, when the device is not in use or before cleaning it. Only unplug Elektralite CW Dazer from the power cord. Never pull out the plug out by pulling on the power cord. -
Page 3: Installation During Construction
Do not clamp the cable to the U bracket or clamp. That is not a secondary safety point. A secondary safety point is any point that will adequately hold the Elektralite CW Dazer if the "C" clamp or half cheesboro fails. -
Page 4: Dmx-512 Control Connection
Connect the provided XLR cable to the female 5-pin XLR output of the Elektralite CP 16/24 or other DMX controller. The other end should be connected to the male 5-pin XLR input of the Elektralite CW Dazer . Then daisy-chain out of the first Elektralite CW Dazer and into the next Elektralite CW Dazer or other dmx device. -
Page 5: Run Mode
1-255 REST (RESET) 8. Static Look. The Elektralite CW Dazer can be set to a single static look quickly. Use the Menu button to get to STAT. Press Enter. The next screen will read W.000. This is addressing the White leds. - Page 6 10. DMX 512 Setting (address). Sets up the address for the dmx. Using the Menu button in the root menu go to DMX Press Enter to get into DMX menu and the display will read the current dmx channel. The display will read for example d.001 This means the fixture's current address is 001 To change it, use the ↑...
- Page 7 13. SET. (Set has several Sub Menus which allow functions to be used). 1). REST This resets all values to their default. Using the Menu button, go through the Root Menu until SET. Press Enter and then use the ↑ or ↓ buttons to get to REST. Press Enter.
- Page 9 16. The Personalities of the CW Dazer. 0-255 Dimmer 0-50 Linear dimmer speed（DIM=OFF） 51-100 nonlinear speed1（DIM1） 101-150 nonlinear speed 2（DIM2） 151-200 nonlinear speed 3（DIM3） 201-255 nonlinear speed 4（DIM4） 0-255 Dimmer No Function 10-49 Synchronized strobe slow 50-99 Non synchronized strobe slow 100-149 Random strobe slow 150-199...
-
Page 10: Dmx Channel Assignments
17. DMX Channel Assignments. Depending on the Personality chosen, the Elektralite CW Dazer can be 2, 3 or 4 channels. Personalities:- WD = 2 channels (the first two channels listed below) WS = 3 channels (the first three channels listed below). WS is the most common choice. -
Page 11: Cleaning And Maintenance
12" x 10.9" x 9.1" 8.5 kgs 19 pounds Elektralite is a division of Group One. Group One and its divisions are constantly improving their product range and we reserve the right to make changes without prior notice. -
Page 12: Other Products
Lee 170 Lavender are flawlessly achieved. The Elektralite 1018 Using 18 high powered 12 watt leds, the Elektralite 1018 is available using 4-in-1 or 6-in-1 leds. Each led can produce any combination of colors as each led is either an RGBW or RGBWAI device... - Page 13 Features include:- Color wheel, two gobo wheels, rotating gobos, rotating 3 facet prism, focus, dimmer, strobe and 16 bit pan and tilt. Elektralite Stingray Ellipsoidal The Elektralite Stingray is a 300 watt LED ellipsoidal with the output of a conventional 750 watt fixture. Different LED types are available including Warm White.
- Page 14 Even though it is compact it packs a massive punch with its 15 watt Cree RGBW leds. Elektralite Dazer Downlight The ideal pendant light. Made specifically for the installation market. Can be simply installed by an electrical contractor. 180 watts of power.
Need help?
Do you have a question about the Cool White Dazer and is the answer not in the manual?
Questions and answers