Table of Contents
Advertisement
Q6. How to configure MAC address?
You can manually change the MAC address of the modem router. It is helpful when your
internet access account provided by your ISP is bound to one specific MAC address,
in other words, your ISP just permits only one computer with the authenticated MAC
address to access the internet. In this case, you can use MAC Clone to allow more
computers to access the internet via the same account.
1. Visit http://tplinkwif.net, and log in with the password you set for the router.
2. Go to
Advanced
get the
MAC Clone
•
If you are using the computer with the authenticated MAC address to access
the modem router, please select
•
If you know the authenticated MAC address, please select
Address
and then enter the address.
3. Click
Save
to make the settings effective.
Tips:
•
Some ISP will register the MAC address of your computer when you access the internet for the first time
through their Cable modem, if you add a router into your network to share your internet connection, the ISP will
not accept it as the MAC address is changed, so we need to clone your computer's MAC address to the router.
•
The MAC addresses of a computer in wired connection and wireless connection are different.
Q7. What should I do if I cannot find my wireless network or I cannot
connect the wireless network?
If you fail to find any wireless network, please follow the steps below:
• Make sure the wireless function of your device is enabled if you're using a laptop with
built-in wireless adapter. You can refer to the relevant document or contact the laptop
manufacturer.
• Make sure the wireless adapter driver is installed successfully and the wireless
adapter is enabled.
•
On Windows 7
>
Network
>
Internet
section.
page. Click the
Add
Use Current Computer MAC
icon, and scroll down to
Address.
Use Custom MAC
93
Hide quick links:
Advertisement
Table of Contents
