Table of Contents
Advertisement
Chapter 4
Set Up Internet Connection
Tips:
• If your internet connection type is
BigPond
Cable, please go to
Advanced
>
Network
>
Internet
to set your router.
• If you use
Dynamic IP
and
PPPoE
and you are provided with any other parameters that are not required on the page,
please go to
Advanced
>
Network
>
Internet
to complete the configuration.
• If you still cannot access the internet, refer to the
FAQ
section for further instructions.
4. 3.
Set Up an IPv6 Internet Connection
Your ISP provides information about one of the following IPv6 internet connection
types: PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel and Pass-Through
(Bridge).
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Advanced
>
Network
> Internet.
3. Select your WAN Interface Name
(Status
should be Connected) and click the
(Edit)
icon.
4. Scroll down the page, enable IPv6, and configure the IPv6 parameters.
17
Hide quick links:
Advertisement
Table of Contents
