Table of Contents
Advertisement
6. Click
Save
to make the settings effective.
7. Go to
Advanced
Now, the root's wireless network is extended and you can use the modem router's SSID
and password to enjoy the network.
Note:
• The extended router (modem router) can have different SSID and password from the root router, you can change your
modem router's SSID and password on
• You can also bridge a network manually: enter the SSID (network name) and MAC Address of the network to be
bridged. Select a Security type and enter related parameters, which should be the same as the network to be bridged.
Q5. What should I do if I cannot access the internet?
1. Check to see if all the connectors are connected well, including the telephone line,
Ethernet cables and power adapter.
2. Check to see if you can log in to the web management page of the modem router. If
you cannot, please adjust your computer's settings according to
if you can access the internet. If the problem persists, please go to the next step.
3. Consult your ISP and make sure the VPI/VCI, Connection Type, account username
and password are correct. If there are any mistakes, please correct the settings and
try again.
4. Refer to
Q6
to clone the MAC address.
5. If you still cannot access the internet, please restore your modem router to its
factory default settings and reconfigure your modem router by following the
instructions in
Use Quick Setup
6. Please contact our Technical Support if the problem persists.
>
Network
>
LAN Settings
Basic
>
Wireless
Wizard.
page to disable DHCP.
page.
Q3
and then see
92
Hide quick links:
Advertisement
Table of Contents
