Convert Wedge Data; Function Key Mapping - Wasp Duraline WLS 8400 ER Series Product Reference Manual

5-14
WLS 8400 Product Reference Guide

Convert Wedge Data

When enabled, the scanner converts all bar code data to the selected case.
Convert Wedge Data to Upper Case
Convert Wedge Data to Lower Case
*
Do Not Convert Wedge Data

Function Key Mapping

ASCII values under 32 are normally sent as control key sequences (see Table 5-2 on page
5-19). When this parameter is enabled, the keys in bold are sent in place of the standard key
mapping. Table entries that do not have a bold entry remain the same whether or not this
parameter is enabled.
Enable Function Key Mapping
*Disable Function Key Mapping