9-4
WLS 8400 Product Reference Guide
Scanning Sequence Examples
In most cases, only one bar code needs to be scanned to set a specific parameter value.
Parameters, such as Prefix Value, require that several bar codes be scanned in the proper
sequence. See each individual parameter for descriptions of this procedure.
Errors While Scanning
Unless otherwise specified, if an error is made during a scanning sequence, re-scan the
correct parameter.
Miscellaneous Default Parameters
Table 9-1
lists the defaults for miscellaneous scanner options parameters. To change any
option, scan the appropriate bar code(s) provided in the Miscellaneous Scanner Parameters
section beginning on page 9-5.
See Chapter A, Standard Default Parameters for all user preferences,
hosts, symbologies, and miscellaneous default parameters.
Table 9-1. Miscellaneous Scanner Options Default Table
Miscellaneous Scanner Options
Transmit Code ID Character
Scan Angle
Prefix Value
Suffix Value
Scan Data Transmission Format
FN1 Substitution Values
Transmit "No Read" Message
Parameter
Default
None
Normal Angle
7013 <CR><LF>
7013 <CR><LF>
Data As Is
Set FN1 Substitution
Value
Disable No Read
Page Number
9-5
9-6
9-6
9-6
9-7
9-9
9-9