User Preferences Default Parameters - Wasp Duraline WLS 8400 ER Series Product Reference Manual

4-4
WLS 8400 Product Reference Guide

User Preferences Default Parameters

Table 4-1 lists the defaults for user preferences parameters. To change any option, scan the
appropriate bar code(s) provided in the User Preferences section beginning on page 4-5.
See Chapter A, Standard Default Parameters for all user preferences,
hosts, symbologies, and miscellaneous default parameters.
User Preferences
Set Default Parameter
Beeper Tone
Beeper Volume
Power Mode
Laser On Time
Beep After Good Decode
Trigger Mode
Aim Duration
Table 4-1. User Preferences Default Table
Parameter Default
All Defaults
High
High
Continuous On
3.0 sec
Enable
Level
0.0 sec
Page Number
4-5
4-5
4-6
4-7
4-7
4-8
4-8
4-10