Host Serial Response Time-Out - Wasp Duraline WLS 8400 ER Series Product Reference Manual

6-20
WLS 8400 Product Reference Guide

Host Serial Response Time-out

This parameter specifies how long the scanner waits for an ACK, NAK, or CTS before
determining that a transmission error has occurred. This only applies when in one of the
ACK/NAK Software Handshaking modes, or RTS/CTS Hardware Handshaking option.
This parameter does not apply to the Wincor-Nixdorf RS-232 Mode
A/B and the OPOS/JPOS host types.
*
Minimum: 2 sec
Low: 2.5 Sec
Medium: 5 Sec