Advertisement
11/
220V—Netzkabel
ä
The keyboard is connected to the control unit as follows:
El Plug the keyboards cable into the appropriate socket
Ei Befestigungsschraube festdrehen.
Um das Gerät für die Inbetriebnahme fertig zu machen,
Steuereinheit, stecken.
(on the Ieft-hand side of the control unit) and
El tighten the retaining screw.
To prepare the device for startup,
El plug the 220V mains cable into the socket at the rear
Verriegelung
zen und
1 Die Abdeckkappe muß einrasten.
26
El pushing it home until it locks in place.
control unit, positioning it from above,
D at the same time pressing the catch to the right.
. The cowling must be properly locked in position.
Advertisement
