Eq Control; Software Version; System Reset - Hitachi AXM1204E Instruction Manual

3. Press SLEEP to show the reminding time till the unit switches off minutes and return
back to previous screen.
4. To cancel the sleep timer press SLEEP repeatedly until "SLEEP OFF" shows on the
display.

Eq Control

This system supports a variety of equalizers and sound effects.
GB
During playback, press Eq on the remote control to select a desired music mode. Each time
Eq is pressed, the music mode will change to the next one as follows:

Software Version

1. Switch on the radio, press and hold (tap and hold)
2. Press (tap)
3. Press (tap)
select.
4. The software version will show on the display.
5. Press (tap)

System Reset

There may be times when you need to reset your unit back to the factory settings especially
when you have moved house. If you experience reception problems you may want to reset
and try again. If you move to another part of the country and pick up the local and national
DAB stations in that area, your previously tuned channels may no longer be available.
1. During Standby mode, press and hold (tap and hold)
"System reset please wait".
2. When successful reset, "System reset ok" will show on the display.
After the system reset, all the tuned stations, FM/DAB preset stations will be erased.
20
FLAT CLASSIC
to select <System>, and then press SELECT/MOnO/ST. to select.
to select <SW Version>, and then press SELECT/MOnO/ST. to
/ MEnU to exit.
ROCK POP JAZZ
/ MEnU to display the menu.
/ MEnU until the display show