Remedy Of Faults; Technical Data - Oase biOrb Operating Instructions Manual

REMEDY OF FAULTS

Malfunction
The water does not heat up.
Water does not reach the set
temperature.

TECHNICAL DATA

Designation
Rated voltage
Power consumption
Regulating range
Dimensions
Cause
No mains voltage
Unit defective
Insufficient water circulation
Unit is not calibrated.
The heating capacity of the unit is not
sufficient with regards to the ambient
temperature or water volume to be
heated up.
Value
230 V AC, 50 Hz
50 W
20 °C ... 33 °C
Æ 23 mm ´ 178 mm
Remedy
Check the mains voltage.
Replace unit
Check the temperature.
Set a slightly higher or lower value
than specified on the scale.
Select a suitable unit.
- EN -
21