Maintenance Instructions
Hydrostatic Ground Drive Belt
1.
To remove the hydrostatic ground drive belt:
a.
Raise the spring-loaded belt tightener arm
and idler pulley to relax belt.
2.
Reverse the procedure to install the hydrostatic
ground drive belt.
68
Belt Tightener Arm
Idler Pulley
Hydrostatic
Ground Drive Belt
Hydrostatic Ground Drive Belt Assembly (Disengaged)
Belt Tightener Arm
Idler Pulley
Hydrostatic
Ground Drive Belt
Hydrostatic Ground Drive Belt Assembly (Engaged)
REPLACING/REPAIRING
b.
Slide belt off pulleys, then release the idler.
Jackshaft
Transmission
Drive Pulley
Spring
Spring