Table of Contents
Advertisement
Page name
Item
Page No.
<CHU MODE>
CURRENT
C09
PMW-F55
F65(1×)
F65(2×)
HDC4300/
HDC-P43
<TRANSMIT>
CCU TRANSMIT
C10
NETWORK TRUNK
BIT RATE
<OTHERS>
ASSIGNABLE
SWITCH
C11
HD DOWNCONV
FILTER
CHARACTER LEVEL
2× MODE (HD)
CLEAR BPU
SETTINGS
RETURN VF
CHANNEL MARKER
<OPTION KEY>
READ (USBtCAM)
C12
INSTALLED OPTION
Set value
PMW-F55, F65(1×), F65(2×),
HDC4300/HDC-P43
ENTER to execute
ENTER to execute
ENTER to execute
ENTER to execute
HIGH BIT RATE, HD-SDI
100Mbps, 1Gbps
OFF, BPU BARS
1 to 4, 1(V:0.3), 1(V:0.6)
1 to 5
0 (SRMASTER), 1 (EVS)
ENTER to execute
NORMAL, HFR LINK
OFF, ON
ENTER to execute
Meaning
Currently selected camera head setting
Sets camera head setting to PMW-F55.
Sets camera head setting to F65 (normal speed).
Sets camera head setting to F65 (2× frame rate).
Available only when the SZC-2002/4002 is installed.
Sets camera head setting to HDC4300 or HDC-P43.
Sets the type of CCU connected.
HIGH BIT RATE: CCU that support high bit rate.
HD-SDI: CCU that does not support high bit rate.
CCUs with 1.5 Gbps optical transmission are not
supported.
Sets the NETWORK TRUNK communications
bandwidth.
Assignable button function select
4K video signal to HD signal down-converter filter
type
Menu character contrast level
Selects the output mode for 2× HD video (SLOT3).
0 (SRMASTER): Output aligned with
horseshoe-shaped field (compatible with the
SR-R1000).
1 (EVS): Output aligned with field (compatible with
servers manufactured by EVS).
Displayed only when the format is 4K HFR.
Reset to factory default settings
Sets the VF return signal to the camera.
NORMAL: Normal-speed signal
HFR LINK: HFR signal 1LINK (steady image can be
used as the image to display in the viewfinder)
Displays markers that identify each channel for HFR
video signals output from the SDI output connectors
of 8 channels (max).
Read the install key from a USB flash drive.
List of installed options (display only)
37
Menu Settings
Advertisement
Table of Contents
