Maintenance; Symbols In This Manual; Environmental Protection - Ryobi R18RH Original Instructions Manual

Hide thumbs Also See for R18RH:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3
These controls may not be supported by the
BLUETOOTH device and application.
All BLUETOOTH enabled device controls can be
used normally while paired to the product.
Volume for any device paired to the product can be
adjusted using the volume control for that device or
by pressing
or
5. Press and hold
enabled device.
NOTE: When the device is disconnected,
flashing in the LCD display and the product will begin
searching for another device.
FOLD-DOWN FLEXIBLE FM RECEPTOR
See figure 7.
To decrease interference or electrical noise, extend the FM
receptor or move the product to a higher elevation. The FM
receptor folds down and out of the way when not in use.

MAINTENANCE

WARNING
The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product will prevent
accidental starting that could cause serious injury.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and can be damaged by their
use. Use dry cloths to remove dirt, dust, oil, grease, etc.
WARNING
Do not at any time let brake fl uids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal
injury.
When
servicing,
use
only
replacement parts. Use of any other part could create a
hazard or cause product damage.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories
and
packaging
environmental-friendly recycling.
6
| English
on the product.
to disconnect all BLUETOOTH
will begin
original
manufacturer's
should
be
sorted
for
SYMBOLS
Safety alert
CE conformity
EurAsian Conformity Mark
Ukrainian mark of conformity
Please read the instructions carefully
before starting the product.
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or retailer
for recycling advice.

SYMBOLS IN THIS MANUAL

Parts or accessories sold separately
The following signal words and meanings are intended to
explain the levels of risk associated with this product:
DANGER
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that
may result in property damage.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents