Do you have a question about the CDR180 and is the answer not in the manual?
Questions and answers
Mal
March 6, 2025
Can I reset Ryobi One+ radio CDR180 to factory setting. Radio makes noise when I take battery out but radio does not work.
1 comments:
Mr. Anderson
March 6, 2025
The manual does not provide specific instructions on resetting the Ryobi One+ radio CDR180 to factory settings. However, removing and replacing the AAA clock batteries will erase all stored settings if not completed within 15 seconds.
English GENERAL POWER TOOL SAFETY WARNINGS 3. PERSONAL SAFETY a. Stay alert, watch what you are doing and use common sense when operating a power WARNING tool. Do not use a power tool while you are Read all safety warnings and all instructions. Failure tired or under the influence of drugs, alcohol to follow the warnings and instructions may result in electric or medication.
English dangerous in the hands of untrained users. near fire or heat. This will reduce the risk of explosion and possibly injury. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts Do not crush, drop or damage battery pack. Do and any other condition that may affect the not use a battery pack or charger that has been power tools operation.
The AM frequency range is 522-1620 KHz or MW (Medium Wave). The display on the radio will show MW and FM. Ryobi 18 V lithium-ion batteries are designed with features that protect the lithium-ion cells and maximise battery life. Under some operating conditions, these built-in features...
Page 8
English To remove: MANUAL TUNING Depress the latches on both sides of the battery pack See Figure 4. to release and remove the battery pack. The TUNE/SEEK buttons are used to manually tune to the desired radio frequency. The selected frequency is DIGITAL DISPLAY displayed on the digital display.
WARNING Press and hold the CLOCK button. The number When servicing, use only identical Ryobi replacement representing the hours will blink on and off. parts. Use of any other parts may create a hazard or Press the VOLUME UP or VOLUME DOWN button to cause product damage.
Page 10
English Wear ear protection Wear eye protection Please read the instructions carefully before starting the machine. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
Need help?
Do you have a question about the CDR180 and is the answer not in the manual?
Questions and answers
Can I reset Ryobi One+ radio CDR180 to factory setting. Radio makes noise when I take battery out but radio does not work.
The manual does not provide specific instructions on resetting the Ryobi One+ radio CDR180 to factory settings. However, removing and replacing the AAA clock batteries will erase all stored settings if not completed within 15 seconds.
This answer is automatically generated