Cleaning And Maintenance - Black+Decker BDXRBV660 Instruction Manual

ENGLISH
Shut Off
1. The unit will stop after 1 second lifted up from the floor.
2. The unit will stop when wheel jammed for more than 6~10 seconds.
Sleep Mode
If the unit stops and no key is pressed in 3 minutes, the unit will go into sleep mode. Any key
pressed will wake up the unit.
Table A: Error code on LED Display (Power LED flash Red)
Display on Possible cause
screen
The wheels are stuck.
E 1
The top cover or dust bin
E 2
is not installed properly.
The bumper is stuck.
E 3
The unit is lifted up from
E 4
the floor.
The unit is stuck on the
E 5
clif or stair.
The battery is not
E 6
installed properly.
Charging error. (Power
switch is of)
The main brush is stuck.
E 7
Table B: Beep Indicator
Beep Represent
Beep 1 time Normal
Beep 2 time Invalid
Beep 3 time Error
P. 15
Solution
Remove the vacuum from obstacles, and
re-start the power switch.
Install the top cover and dust bin properly.
The unit will detect the error and fix
automatically.
Remove the vacuum from obstacles. The
unit will detect the error and fix
automatically.
Put the vacuum back on the floor.
Remove the vacuum from dark floor
surface.
To install the battery properly, please refer
to page 22 for battery installation, and
re-start the power switch.
Remove the vacuum from obstacles, or
reinstall main brush and re-start the power
switch.

CLEANING AND MAINTENANCE

WARNING:
Turn off vacuum cleaner before performing maintenance to the
vacuum cleaner.
Do NOT clean the vacuum cleaner, components or accessories using petroleum or any other
flammable liquid or solvents, etc.
Clean only the outside of the vacuum cleaner.
Use only a moist cloth and mild detergent for cleaning the vacuum cleaner, components and
accessories.
After cleaning, wipe of the moisture on vacuum cleaner, components and accessories with a
dry cloth.
DO NOT place accessories, tools or components in a dishwasher.
Maintenance Method:
The operation and maintenance of the vacuum is very simple. After each use, clean any dirt
left behind on the dust bin and filter. It is not necessary to clean the intake after every use.
Cleaning Dust Bin:
1. Press and lift the cover from "A" position to open the top cover of the cleaner.
ENGLISH
P. 16