Advertisement
5. Car Chair
Connect the positive pole of the power supply before installing the car chair. The hook of the
seat should be aligned in the slot, then tighten the fixing holes on both sides and the front of
the seat with screws turning clockwise. Insert the charger into the charging hole for
charging. Do not operate the car while charging.
6. Adding Batteries to the Remote Control
Remove the screw on the battery cover with a screwdriver and then remove the battery
cover, insert the 2 AAA 1.5V batteries. It needs to match the frequency to control the car.
Refer to the remote control section of this user guide for pairing instructions.
Advertisement
