Table of Contents
Advertisement
Parameter
Setting
-inf ~ 0 dB
Input Level
Default: 0 dB
-inf ~ 0 dB
Output Level
Default: 0 dB
BLUETOOTH
[MENU] button BLUETOOTH
VIVO H10 Pianos are equipped with Audio and MIDI Bluetooth® (4.2 Low
Energy) function.
Thanks to this technology, you'll be able to stream music and send MIDI
data wirelessly from a Bluetooth® capable smartphone, tablet or computer
to VIVO H10.
For details see "Wireless Function" (p. 56).
MIDI
[MENU] button MIDI
This group allow you to configure the MIDI parameters. You can transfer
MIDI data between the VIVO H10 and your sequencer software.
Here is a brief explanation of VIVO H10 keyboard parts:
Part
At power-on, the instrument is automatically selected in Grand
Piano Mode. All keyboard play note in the Main part.
Main
This part can be combined with the Main part. To do this press
the [
] button. The second part (Coupled Part) play over
the entire keyboard in combination with the Main part.
Coupled
Main Part +
This part is activated when you split the keyboard in two
zone: Left and Right. To split the keyboard press the [
] button. The Keyboard is now divided into two sections. The
region of the keyboard to the left of the split point becomes
the Lower part , while the region of the keyboard to the right
Lower
of the split point becomes the Main part.
Lower Part
INTERNAL MEMORY
INTERNAL MEMORY
Explanation
Main Part
Coupled Part
Main Part
1.
Select the group of parameters you need (Reception, Transmission and
Global).
RECEPTION
You can configure the MIDI receive parameters of Main, Coupled
and Lower part.
1.
Select the part you want to edit (Main Coupled and Lower).
In the example above we selected the Main keyboard part.
Main, Coupled, Lower
Parameter
Setting
Off, On
Status
Default: On
1 ~ 16
Channel
Default: 1
-48~0~+48
Shift
Default : 0
Modulation
Volume
Panpot
Expression
Reverb
Off, On
Hold
Default: On
Sostenuto
Soft
PG (Program
Change)
PB (Pitch Bender)
Part
MIDI RX channel (default)
Main
1
Coupled
2
Lower
3
Memory
15
2.
If you selected the "Memory" part, the following page is showed:
BLUETOOTH
Explanation
Select "On" if you want the selected part
to receive MIDI data.
Allows you to assign a MIDI receive
channel to the selected part.
This parameter allows you to transpose
the received note messages before
sending them to the VIVO H10's tone
generator. The maximum possible
transposition is four octaves up (48)
and down (–48). Each step represents a
semi-tone.
These filters allow you to specify
whether (On) or note (Off ) the messages
in question should be received.
65
Advertisement
Table of Contents
