Table of Contents
Advertisement
Personalizing Your Sounds (T2L)
14
T2L-Modelling
The revolutionary technology found on all
models of DEXIBELL digital Pianos.
T2L-Modelling
innovative
technologies
achieve maximum timbre accuracy and
precise sound responsiveness to the multiple
articulations of a pianist.
T2L modelling has many algorithms that simulate all the
characteristics of an acoustic piano. It take care of many aspect as:
No Damper ("No Damper" on high notes)
The last 18 higher notes, like in the acoustic instrument, do not have the
presence of the dampers and then are free to vibrate even when keys are
released.
The duration of these notes, playing in staccato mode, is much longer than
the previous notes that instead have the presence of the damper
FP-Simulation ("Forte Pedal" multi actions simulation)
The "Forte" Pedal (Sustain), performs several actions that are simulated
through this function.
A) When the "Forte" pedal is pressed, a sound is generated to simulate the
damper friction noises of felts when releasing from the strings (Damper
Friction Noise).
B) Pressing the "Forte" pedal, the active notes will be enriched with
resonances produced by all strings free to vibrate, thanks to the raised
dampers (Strings Resonance). The result of the Strings Resonance makes
the sound of a sustained note by the use of the "Forte" pedal substantially
different from the sound of a just held note.
C) When the "Forte" pedal is released, a noise is simulated like the mechanical
noise in the acoustic instrument (Sustain Pedal Mechanical Noise)
SP-Simulation ("Soft Pedal" Simulation)
The "Soft" Pedal, acts a change of volume and timbre color of the sound,
simulating the "soft" function on the acoustic piano.
Soft Pedal
is the combination of
developed
to
Notes without
Dampers
(A) & (B) "Forte" pedal is
pressed, felt dampers are
raised
(C) "Forte" pedal is released,
felt dampers are resting on
strings
Making Slight Additions or Sound
Alterations
Although Dexibell sound are developed to achieve the maximum
sound accuracy , you can necessity to modify them at your taste
them or create new sonority.
1.
Select the sound that you want personalize.
2.
From the main page press the "T2L" Function button to
access the Editor function.
MEMO
You can also select this function pressing [MENU] button T2L
EDITOR.
The display shows the Editor sound page that contains all possible
parameters for the tone you selected:
In the example above the Italian Live Platinium was selected.
3.
Use the [] [] buttons to select the parameter you wish
to modify.
4.
Use the
[
] buttons to adjust the value.
[]
5.
To modify a tone in the LOWER or COUPLED part press the
relative Function button.
Saving your changing
All you need to do is to save your setting in a memory. See
"Working with the Memories" (p. 50).
Parameters to be edited
The parameter list depends on the characteristics of the selected sound.
39
Advertisement
Table of Contents
